If more than one valve is assigned a valid solenoid
location, all instances of that location will be
highlighted in red, and are considered invalid.
Figure 67 Pump Screen, Valve Assignment with
duplicates
A value of 0 for the control module, or 00 for the
solenoid, indicates no previous location assignment
and both are also invalid assignments.
If a valve location is considered invalid, any operation
that uses that valve will be prevented from running.
This is easily identified on the Recipe screens. If
any of the material’s valves are considered invalid,
that material will be highlighted red. If any of the
valves used in the flush or purge procedure are
considered invalid, the flush or purge sequence will
be highlighted red.
Figure 68 Recipe Screen with invalid component
valve location
Figure 69 Recipe Screen 2 Invalid
86
3A6287E
