5
OPERATIONAL SAFETY PROCEDURES
This safety information will not be repeated in the text of this manual.
The symbols pertaining to this information will appear where appropriate
to alert the operator to potential hazards.
Solvents and Chemicals
WARNING:
The solvents and chemicals used with this equipment expose
the operator to certain hazards. Adequate personal protective measures
must be taken so as to avoid exceeding the Threshold Limit Value (TLV)
of the products being used, as established by the Occupational Safety and
Health Administration (OSHA) or other qualified agency. Information
concerning personal protection and proper handling should be obtained
from the supplier of such chemicals.
High Voltage
WARNING:
To prevent serious bodily injury from electrical shock, never
open the electric panels or otherwise service this equipment and/or
equipment used with it before switching off the main power disconnect
and interrupting supply voltage at the source. The electrical service must
be installed and maintained by a qualified electrician.
High Pressure
WARNING:
This equipment has or is used with equipment that has
hydraulic components capable of producing up to 3500 psi. To avoid
serious bodily injury from hydraulic injection of fluid, never open any
hydraulic connections or service hydraulic components without bleeding
all pressures to zero
.
Personal Protective
Equipment
WARNING:
To avoid serious bodily injury, proper protective gear must
be worn when operating, servicing, or being present in the operational
zone of this equipment. This includes, but is not limited to, eye and face
protection, gloves, safety shoes, and respiratory equipment as required.
High Temperature
WARNING:
This equipment has or is used with equipment that has high
temperature components such as primary heaters and heated hoses. To
prevent serious bodily injury from hot fluid or hot metal, never attempt to
service the equipment before allowing it to cool
.
Warning
WARNING
: Failure to read and follow this safety information may result
in personal injury and/or damage to the equipment from one or more of
the above listed hazards
Содержание BetaCell 241D
