![background image](http://html1.mh-extra.com/html/graco/24z660/24z660_instructions-manual_2251638057.webp)
Main Line Hose
3A5082G
57
Main Line Hose Assembly
1.
Secure end of hose in a vise (F
NOTE:
Do not over tighten the vise and crush the
hose. Vise should be just tight enough to hold the
hose securely in place.
2.
Cut the hose square with a fine-tooth hacksaw or
cut-off wheel (F
. 57).
3.
Remove hose (b) from vise. Shake or lightly tap the
cut end of it to remove debris and small hose pieces
that resulted when cutting the hose.
4.
Slide socket (a) over cut end of hose (b). Hand
tighten socket to hose by turning socket
counterclockwise into hose (F
.
5.
Use a wrench to finish tightening socket (a) until it
bottoms out. Then back off 1/4 turn to 1/2 turn (F
59).
SKIN INJECTION HAZARD
A hose that has been crushed or damaged in the
vise may leak. High pressure fluid leaks will pierce
skin. This may look like just a cut, but it is a serious
injury that can result in amputation. Get immediate
surgical treatment.
To reduce the risk of skin injection when testing or
using the hose assembly:
•
Inspect each hose assembly for cuts or damage.
•
Verify that the hose assembly has not been
crushed or damaged in the vise.
•
Do not use a damaged hose assembly.
F
IG
. 56
F
IG
. 57
F
IG
. 58
F
IG
. 59
b
a
a
Loosen
Содержание 24Z660
Страница 7: ...Typical System Installation 3A5082G 7 FIG 4 ...
Страница 11: ...Pump 3A5082G 11 Pump Dimensions FIG 7 ...
Страница 13: ...Pump 3A5082G 13 Mounting Bracket and Pump Dimensions FIG 9 ...
Страница 67: ...Notes 3A5082G 67 Notes ...