Gotop RigiScan Plus, Руководство пользователя

Страница: 62 / 74

-62-
R
IGI
S
CAN
®
( User Guide )
Slide the RigiScan Plus Monitor in the leg strap pocket.
The loops are labeled on the wide end of the RigiScan Plus Monitor as BASE and TIP . The
Base Loop has the blue end and the Tip Loop has the white end. Place the Base Loop around your
penis approximately 1/4” (6 mm) from the base of your penis. Place the Tip Loop around the end of
your penis about 1/4” (6 mm) from the glans or head of your penis (see Figure B-2). You may have to
stretch your soft penis to place the loops properly. If the loops are too small to let you put them on
comfortably, insert two fingers into the loop and gently pull outward to widen them (see Figure B-3).
The RigiScan Plus Monitor will adjust the loops when it is turned on.
Starting a RigiScan Plus Session
To turn the RigiScan Plus Monitor on, press the on/off button until it
clicks and the button stays in. To turn off the RigiScan Plus Monitor, press
the on/off button until it clicks and pops out (see Figure B-4). The RigiS -
can Plus Monitor will beep once when activated the first night, twice
the second night, and three times the third night. Once you have the
RigiScan Plus Monitor and loops in place, hold the loops while you turn
on the RigiScan Plus Monitor to make sure the loops stay in place on
your penis. Once the RigiScan Plus Monitor is turned on, the base loop,
followed by the tip loop, will slowly become smaller to fit snugly around
your penis. Once the unit has adjusted the loops, you can let go of them.
The loops will squeeze gently around your penis every 15 seconds and
will continue through the full session (up to ten hours). This is how the RigiScan Plus Monitor measures
your erections. You may wear loose pajamas over the RigiScan Plus Monitor, however, be careful not
to kink or bend the cables sharply. To interrupt the session for any reason, such as using the toilet, press
Fig B-4 Turning on the
RigiScan Plus monitor.
Fig. B-2 Placing the Base and
Tip Loops
Fig. B-3 Widening the
Loops