MDE-LEDI-NETWORK-TDS-4099V3.0
43
E
NG
LI
S
H
►
DHCP client identifier:
This field can contain a customisable DHCP ID. The value is inserted as an argument of
DHCP option 61 in DHCP requests sent to the server. Your DHCP server can then store
the ID/IP address pair to reserve this IP address and redistribute it when the same ID is
provided. It can also register the product in your DNS (Domain Name System) server,
which allows the product to be addressed with its ID rather than its IP. For example, if
you give the
LEDI
®
Network TDS
the DHCP name
ntpsrv1
, simply type
ntpsvr1
in the
address field of your web browser to access the product site.
►
Disable Ethernet link failure alarm:
Checking this box will disable the display of the front panel alert message when the
Ethernet interface cable is disconnected.
5.2.4. "Alarms" Page
This Web page is used to configure all the alarms that the
LEDI
®
Network TDS
can send.
Syslog reporting
►
This section allows you to configure the supervision device by sending event logs in
Syslog format.
NOTE: It is recommended to use SNMP supervision instead of Syslog reports (See section 5.2.5.
“SNMP” page).
If
“Enable Syslog reporting” is checked, when an event/alarm occurs, the
LEDI
®
Network
TDS
sends a UDP packet to the ports of both IP addresses configured here. Syslog
messages have the format defined in RFC 5424. For example,
“
<14>1 2018-07-
02T07:21:00Z LEDI_NETWORK_TDS_V1_181192 - - - - - A new configuration
has been defined in the "Alarms" Webpage
”.
☛
Syslog
messages are described in “8. Appendix C – Maintenance – 8.5.1.
Syslog message catalogue” in this user manual.
