Golden Eagle MONROE, Руководство по эксплуатации и установке

Страница: 9 / 36

Specifications
Width : 21.5”
Height : 28.5”
Depth : 24”
Weight : 225 lbs.
Flue size : 3” or 4”
Hopper Capacity : Up to 45 lbs.
(This can vary widely depending on pellet size,
length, and diameter)
EPA status : Exempt Burn time : 1 lb. to 4.5 lbs. per hour
BTU range : 8,200 to 36,000
Approved installations : mobile home, alcove, conventional
Clearances
The Monroe wood pellet stove has been independently tested and listed for use with the following
clearance requirements. All clearances are measured in inches from the sides, rear, and face (door
opening) or stove body.
Floor Protection
Freestanding installations require a minimum 21” wide by 28”
deep floor protection. The stove must be placed on a continuous
(grouted joints) noncombustible material such as ceramic tile,
cement board, brick, 3/8” millboard or equivalent, or other
approved or listed material suited for floor protection.
THE MATERIAL(S) USED MUST HAVE, OR COMBINE
TO HAVE, A MINIMUM INSULATIVE RATING OF ‘R1’.
Ceramic tile, or any tile, requires a continuous sheet
beneath to prevent the possibility of embers falling
through to the combustible floor if cracks or separation should occur in the finished
surface, this would include floor protection for Built ‐ in raised hearths. Check local codes
for approved alternatives.
Figure 1
Figure 2