Golden Eagle MONROE, Руководство по эксплуатации и установке

Страница: 25 / 36

ASH DISPOSAL
To remove ashes:
A. Make sure fire is out and firebox is cool.
B. Clean heat exchanger tubes (see “ CLEANING ” and Figure 15).
C. Remove the burnpots inner section by grasping it and pulling straight up (see Figure 16).
D. Empty ashes from the inner section and scrape with cleaning tool; make sure holes are not
plugged.
E. Vacuum to remove ashes from the burn chamber interior and the burnpot shell.
F. Dispose of ashes properly. (See “ ASH REMOVAL ” above)
g. Replace inner section into burnpot; make sure it is level and pushed all the way back down
and that the igniter hole is to the rear when it is reinstalled (see Figure 17).
h. Make sure the burnpot is level and pushed all the way in, if the collar on the burnpot
attached to the fresh air tube is not pushed back to meet the firebox wall, the Hot Rod will
not work properly.
MAKE SURE ASHES ARE COOL TO THE TOUCH BEFORE USING A VACUUM.
VACUUM USE
We suggest using a vacuum designed for ashes.
(We recommend LoveLess Ash Vac, 1 ‐ 800 ‐ 568 ‐ 3949 Ext. #27 – www.lovelessash.com)
Some regular vacuums and shop vacs leak ash into the room. Your vacuum or shop vac may have a
special filter or bag available to eliminate this leakage.