Golden Eagle MONROE, Руководство по эксплуатации и установке

Страница: 5 / 36

INTRODUCTION
Thank you for purchasing the Golden Eagle Wood Pellet Burning Stove. You are now prepared to burn wood in the most
efficient, convenient way possible. To achieve the safest, most efficient and most enjoyable performance from your stove,
you must do three things: 1) Install it properly; 2) Operate it correctly; and 3) Maintain it regularly. The purpose of this
manual is to help you do all three.
This stove has been independently tested to ASTM E1509 ‐ 04 Standard Specification for Room Heaters, Pellet Fuel Burning
Type 1, ULC/ORD 1482 ‐ 90 Standard for Solid Fuel Room Heaters, and Oregon Administrative Rules for Mobile Homes (814 ‐
23 ‐ 900 through 814 ‐ 23 ‐ 909) and Installation as a Stove Heater.
This appliance is designed specifically for use only with pelletized wood. It is designed for residential installation according
to current national and local building codes as a freestanding room heater. It is also approved as a mobile home heater
which is designed for connection to an outside combustion air source.
This stove is designed to provide the optimum proportions of fuel and air to the fire in order to burn almost free of smoke
and soot. Any blockage of the air supply to or from the stove will seriously degrade its performance and will be evidenced
by a smoking exhaust and a sooting window. For best operation the ash content of the pellet fuel should be less than 1%
and the calorific value approximately 8200 BTU/LB. Avoid high ash content fuels because this will rapidly fill up the burn pot
and eventually cut off the combustion air supply.
PLEASE READ THIS ENTIRE MANUAL BEFORE INSTALLATION AND USE OF THIS PELLET FUEL ‐
BURNING ROOM HEATER. FAILURE TO FOLLOW THESE INSTRUCTIONS COULD RESULT IN
PROPERTY DAMAGE, BODILY INJURY OR EVEN DEATH.
Keep this manual handy for future reference.
THIS PELLET STOVE, WHEN INSTALLED, MUST BE ELECTRICALLY GROUNDED IN ACCORDANCE
WITH LOCAL CODES, OR IN THE ABSENCE OF LOCAL CODES, WITH THE NATIONAL ELECTRICAL
CODE, ANSI/NFPA 70 .
The authority having jurisdiction (such as municipal building department, fire department, fire
prevention bureau, etc.) should be consulted before installation to determine the need to
obtain a permit.
THE STOVE WILL NOT OPERATE USING NATURAL DRAFT OR WITHOUT A POWER SOURCE FOR
THE BLOWER SYSTEMS AND FUEL FEED SYSTEM AND MUST NOT BE BURNED WITH ANY TYPE
OF FUEL BESIDES WOOD PELLETS.
COMMERCIAL AND INDUSTRIAL INSTALLATIONS OF PELLET STOVES SHOULD NOT BE USED
SINCE OPERATIONAL CONTROL IS OFTEN NOT WELL MANAGED IN THESE SETTINGS.
W
ARRANTY
R
EGISTRATION
To receive full warranty coverage, you will need to show evidence of the date you purchased your stove. We suggest that
you make a copy and attach your sales invoice to this manual, so that you will have all the information you need in one
place should the need for service or information occur. Also be sure to complete the warranty registration form on our
webpage (preferred method) or mail in the one that came with the stove. When registering your stove for warranty a
copy of the sales invoice must be included either in electronic format if registered via the internet, or a legible copy if you
mail in the warranty registration card that came with your stove.