Instruction Manual - Touch Screen
2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)
PopClean Elite Popper -600 Series
2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)
Page 28
gmpopcorn.com
Initial Startup
– User Configuration
The Elite Touch Screen PopClean Popper has been programmed at the factory with default
system settings for operation mode, oil calibration, recipe settings, and additional unit settings.
For Initial Startup of a New Unit
1.
User Configuration
- For initial setup of a new unit (or for replacement software boards)
review the default settings shown below and adjust (if needed). For a full description of each
setting, reference Navigating the Touch Screen Control section N7.10 User Configuration.
To open User
Configuration
Screens:
Operation (Default Setting)
Option
User Config.
Screen 1
1.
Unit Name:
Enter name for unit, if desired.
2.
Operational Mode:
(default is Standard)
•
STANDARD Mode: Allows menu access to the
operator for screen navigation, recipe selection, and
programming.
•
THEATER Mode: Allows operator access to popping
corn functions ONLY; selecting a recipe and access
to all other functions requires a Manager’s password.
Standard
or
Theater
3.
Temperature Mode:
(default is °F)
°F
or
°C
4.
Screensaver:
(default is ON)
ON
or
OFF
5.
Screensaver timeout (minutes):
(default is 15 min.)
Press
▲ or ▼ to adjust
.
6.
Filter timeout (minutes):
(default is 15 min.)
(number of minutes without a cook cycle, before filter
system is automatically shut OFF).
Press
▲ or ▼ to adjust
.
7.
Crisper System ON/OFF:
(default is Automatic)
(Crisper turns ON automatically when a cook cycle is
started).
Manual
or
Automatic
8.
Time:
(preset at factory, displayed in Status Bar).
Select to enter time (00:00).
9.
Date:
(preset at factory)
Select to enter date
(00/00/0000).
10.
Clock Type:
(default is 12 Hour)
12 Hour
or
24 Hour
11.
Beep Volume:
(preset at factory)
Slider adjusts from low to high.
12.
Brightness:
(preset at factory)
Slider adjusts from low to high.
13.
Cook Log Date:
(synchronizes the cook cycle date
when any user configuration date change is made)
Press Set Cook Log
–
Today
To EXIT Config.
Press Menu button
, then select Home.
3
1
4
5
2
Press
to
show User
Config. Screen 2