Instruction Manual - Touch Screen
2011, 2848, 2860, 2872, and 2873 (32 oz. Pop-O-Golds)
PopClean Elite Popper -600 Series
2911, 2948, 2960, 2972, and 2973 (52 oz. Medallions)
Page 22
gmpopcorn.com
Updraft Filters
After changing filter(s) or correcting a filter system error code,
turn the Power Switch OFF then
back ON to reset the display screen.
Allow kettle to cool completely before accessing filters.
BAFFLE FILTER
To Remove the Baffle Filter
:
1.
Lift filter towards top of popper.
2.
Swing bottom end clear of mounting
brackets and remove filter.
3.
Reinstall in reverse order.
Filter
holes should face outward to properly
drain into grease tray; make sure a
clean grease tray is in place. Ensure the
filter engages the interlock switch.
4.
RESTART popper to clear error.
BOX FILTER and HEPA FILTER
To remove the Box Filter:
1.
Rotate the six Compression Knobs counter-
clockwise, then lift off the Filter Door (door
MUST be reinstalled, so tab engages interlock,
then FULLY turn knobs clockwise to close).
2.
Lift Box Filter out to remove (see image above).
To reinstall
: Carefully slide the Box Filter in and
ensure the filter engages the interlock switch.
All filters
MUST be properly installed
, and all interlocks
MUST be engaged
for the popper to
operate. The display will show a filter system issue - to continue operation, recheck the indicated
filter or filter door and ensure the interlocks are engaged (reference images below).
2
1
Install Filter with
holes facing out.
Baffle Filter
Grease Tray
Baffle Filter Interlock
Compression Knob
Filter Door
(Door Tab MUST engage Interlock)
Box Filter
HEPA Filter
Box Filter
Interlock
Filter Door Interlock
(Door Tab MUST engage)
HEPA Filter Interlock
To remove the HEPA Filter
:
3.
With the Box Filter removed, shift the
HEPA Filter over until it clears the door
opening, then lift out to remove.
4.
Carefully reinstall in reverse order
and ensure filters engage interlock
switches.
5.
RESTART popper to clear error.
6.