USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 41/60
5 0.0
Press
to confirm the value and go on
setting the Y axis
0 0 0 0 0.0
*
01 02
5 0.0
Enter the value of the Y axis
position, aligning it to the
decimal point displayed
0 0 1 0 0.0
*
01 02
0 1
*
Press
to confirm the value and go on
setting the repetitions
01 02
Enter the number of repetitions (10).
Note:
at this point, it is possible to program also the status (ON/OFF) that the axes AUX outputs
will have to assume during the various cycles of the program. The ON/OFF status has to
be programmed on both AUX outputs, regardless of the axes activation.
If required, follow the instructions below, otherwise go on setting the second cycle (see
point 1).
Example: cycle 1, AUX X axis = ON AUX Y axis = OFF
o F F
*
Press
to go on setting the AUX output
status
o F F
01 02
o n
*
Press
to program the ON status of the
X axis output
o F F
01 02
o n
Press
to confirm and proceed with the
Y axis programming
o F F
*
01 02
POINT (1)
0 0 0 0 0.0
*
Press
to confirm and go on setting the
second cycle
0.0
02 02
0 0 2 5 0.0
*
Enter the value of the X axis
position, aligning it to the
decimal point displayed
0.0
02 02
2 5 0.0
Press
to confirm the value and go on
setting the Y axis
0 0 0 0 0.0
*
02 02
Содержание THESI 320
Страница 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Страница 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Страница 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Страница 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
