USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 35/60
Enter the desired value and align it to the decimal point displayed.
0.6 0
Press
to confirm the value and go back
to parameters selection
0.6 0 P 26
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Parameter 27
– SETTING OF DECELERATION TIME
With this parameter it is possible to set the duration of the deceleration ramp, used to
move the axis. The value is expressed in seconds.
The deceleration ramp starts from the output voltage value corresponding to the axis
movement at high speed, up to the voltage value corresponding to the axis movement at
low speed (see parameter 22). The final positioning will be executed at low speed.
Example of value setting X axis = 0.70 seconds Y axis = 0.70 seconds
0.0 0
Press
to select the parameter
(see PARAM. SELECTION)
0.0 0 P 27
0.0 0
Press
and
to select both axes
0.0 0 P 27
0 0 0 0.0 0
*
Press
to confirm the selection and
enter the X axis setting
0.0 0
P 27
Enter the desired value and align it to the decimal point displayed.
0.7 0
Press
to confirm the value and
enter the Y axis setting
0 0 0 0.0 0
*
P 27
Enter the desired value and align it to the decimal point displayed.
0.7 0
Press
to confirm the value and go back
to parameters selection
0.7 0 P 27
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Содержание THESI 320
Страница 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Страница 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Страница 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Страница 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
