USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 26/60
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Parameter 15
– SETTING OF DEVIATION VALUE
With this parameter, it is possible to set the position deviation value to be applied at the
closure of the related input.
Example of value setting X axis = 3.0 mm Y axis = 5.5 mm
0.0
Press
to select the parameter
(see PARAM. SELECTION)
0.0 P 15
0.0
Press
and
to select both axes
0.0 P 15
0 0 0 0 0.0
*
Press
to confirm the selection and
enter the X axis setting
0.0 P 15
Enter the desired value and align it to the decimal point displayed.
3.0
Press
to confirm the value and
enter the Y axis setting
0 0 0 0 0.0
*
P 15
Enter the desired value and align it to the decimal point displayed.
3.0
Press
to confirm the value and go back
to parameters selection
5.5 P 15
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Parameter 16
– SETTING OF WAITING TIME FOR DEVIATION
With this parameter, it is possible to set the waiting time after the closure of the input,
before deviation begins. The value is expressed in seconds.
Example of value setting X axis = 0.60 seconds Y axis = 0.60 seconds
0.0 0
Press
to select the parameter
(see PARAM. SELECTION)
0.0 0 P 16
Содержание THESI 320
Страница 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Страница 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Страница 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Страница 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
