USER MANUAL
POSITION CONTROLLER THESI 320
MT02_A41_A_TH320_GIVI_ENG rev. E
Pag. 28/60
Enter the desired value and align it to the decimal point displayed.
0.3 0
Press
to confirm the value and go back
to parameters selection
0.5 0 P 17
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Parameter 18
– SELECTING “POSITION IF WITHIN TOLERANCE” OPTION
This parameter allows to enable/disable the possibility of positioning again, even when the
current position is within the tolerance range.
Note: the parameter setting will be applied on both axes.
Example of selection: enabling
n o
Press
to select the parameter
(see PARAM. SELECTION)
P 18
n o
*
Press
to confirm the selection and
enter its settings
P 18
y E S
*
Press
to choose the desired selection
P 18
y E S
Press
to confirm and go back to
parameters selection
P 18
5 0.0
Press
to quit configuration and go back
to the positions display
2 0 0.0
Parameter 19
– SELECTING “SPEED CHANGE WITHOUT STOPPING” OPTION
This parameter allows to enable/disable the possibility of changing the speed from fast to
slow without stopping the axis movement.
Note: the parameter setting will be applied on both axes.
Example of selection: enabling
n o
Press
to select the parameter
(see PARAM. SELECTION)
P 19
Содержание THESI 320
Страница 1: ...User Manual Position Controller T TH HE ES SI I 3 32 20 0 www givimisure it...
Страница 57: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 57 60 NOTES...
Страница 58: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 58 60 NOTES...
Страница 59: ...USER MANUAL POSITION CONTROLLER THESI 320 MT02_A41_A_TH320_GIVI_ENG rev E Pag 59 60 NOTES...
