GILES FSH-2 Скачать руководство пользователя страница 51 | Manualshive

Страница: 51 / 66

GILES FSH-2 Скачать руководство пользователя страница 51

41

Cleaning & Maintenance

Cleaning & Maintenance

5.02.1

Weekly Hood Cleaning

Exterior:

Use a good quality stainless steel cleaner to clean all external stainless steel surfaces.

Inside Skirt Section:

Use a mild, non-toxic, degreasing cleaner (see recommendation above) to clean the inside surfaces

of the hood skirt section directly above the appliance
Weekly Cleaning should also include cleaning the baffle filter and E.A.C. collector cell as explained in

Section 5.01

.

To maintain effectiveness and performance, the hood should be deep cleaned, at a minimum, every 3 months.
1. Disconnect power to the unit, preferably at the circuit breaker.
2. Unplug and remove cooking appliance from under Hood.
3. Remove all filters.
4. Use a soft cloth, or sponge, and a mild bio-degradable degreasing cleaner

(Simple Green® Crystal Foaming Spray Cleaner)

to clean inside the entire

hood plenum, removing grease film accumulation from surfaces.

5. Inspect the hood fan and, if possible, clean any grease build-up from the

blades using degreaser and a small brush (use cleaner sparingly).

NOTE:

When restarting hood after cleaning, hold a cardboard box, or other

suitable item, over the exhaust outlet to catch residue/cleaner which may

be discharged from the blower.

5. Thoroughly clean the under-hood area and all exterior surfaces with mild

degreaser or a good quality stainless steel cleaner.

6. Allow hood to thoroughly dry or wipe dry with clean dry cloth.
7. Clean baffle filter and E.A.C. collector cell see

Sections 5.01.

If necessary, obtain a fresh new charcoal filter

...

reinstall all filters.

8. Restore power and reposition the cooking appliance.

5.02.2

Quarterly Hood Cleaning

This section explains periodic maintenance procedures for the ventless hood system. Adhering of these procedures will

help to maintain the unit’s continuing performance.

A

Maintenance and Service Log

is provided in this manual, see

Section 5.05

.

5.03

Hood Maintenance

Continued on Next Page

«
...
49
50
51
52
53
...
»

Содержание FSH-2



































































Отзывы:

Нет отзывов