GILES FSH-2 Скачать руководство пользователя страница 11

Страница: 11 / 66

Thank you for purchasing a

GILES

Free Standing Ventless Recirculating Hood,

Model FSH-2 or FSH-2A-99

manufactured by Giles Enterprises, Inc., Montgomery, Alabama (USA), hereafter referred to as

"Giles"

. Giles

Ventless Hood technology is the result of extensive engineering, research and development. Every unit is

thoroughly inspected and tested prior to shipment to ensure they operate flawlessly after installation. With proper

care and maintenance these units should provide years of trouble-free service.

The hood is listed for use with fryers

pressure fryers, to remove grease-laden cooking vapors, as well as helping

to control objectionable odors which may be generated during cooking. It utilizes an electronic air cleaner (E.A.C.),

which electrically charges grease particulate in the air stream, then electrostatically captures it on collection plates

as the air passes through. An activated charcoal filter provides a final filter stage to help control cooking odor in the

recirculated air.

To help protect your investment, we recommend taking a few moments to read this Manual and familiarize yourself

with proper installation, cleaning, and maintenance procedures. Adhering to these recommended procedures

minimizes the potential for costly downtime and equipment repairs.

Please retain this manual for future reference.

Three Stage Filtration

: Three (3) different filters remove particulate and grease-laden vapor from the air stream.

Extinguishing System

: Built-in fire extinguishing system protects against accidental fire in the fryer underneath the

hood.

Final field set up, charging and commissioning is the responsibility of the purchaser.

EAC Cleaning Timer

(FSH-2A-99 Only)

Preset timer alerts user when it is time to clean the Electronic Air Cleaner

(E.A.C.) collector cell.

DAILY

cleaning is important to maintain peak air cleaning

performance. If cell is not cleaned in a timely manner, the timer system can shutdown the

hood/fryer, and prevent further operation until cell is cleaned.

Push-To-Start Power:

Hood/fryer combination will not automatically restart when power is restored after an

interruption. Power switch must be pressed to start. Complies with code requirements in

some jurisdictions.

Primarily Series 430 stainless steel and aluminized steel, where applicable.

Appliance Receptacle

(FSH-2A-99 Only)

Built-in, interlocked, NEMA 15-50R power receptacle for the cooking

appliance. Plug appliance power cord directly into hood, can help minimize on-site

installation work.

Maximum appliance load = 50 amps

HEPA Filter Model

Hood model equipped with replacable HEPA filter as an alternative to the Electronic Air

Cleaner system.

Model: FSH-2, FSH-2A-99

Introduction

1.01

Construction

1.02

Standard Features

1.03

Optional Features

Содержание FSH-2



































































Результаты поиска

Содержание FSH-2

Отзывы:

GILES FSH-2, Руководство по эксплуатации и обслуживанию, Страница: 11 / 66

Результаты поиска

Содержание FSH-2

Отзывы: