GILES FSH-2 Скачать руководство пользователя страница 24

Страница: 24 / 66

Installation

Model: FSH-2, FSH-2A-99

The fire suppression system used in the

Giles Ventless Hood

is the

ANSUL® R-102 Restaurant Fire Suppression

System (Standard UL 710B Listed)

Final field set-up, charging, certification and arming of the system must be

performed by an authorized Ansul distributor in accordance with the system listing.

The fire suppression system is designed and UL-listed to provide fire protection for cooking appliances such as

fryers. It a mechanical system that automatically protects 24 hours per day. The factory-installed system includes

piping, nozzles (appliance & plenum), Automan release mechanism, detector link brackets, conduit for link cabling,

exhaust outlet fire damper and a 1-1/2 gal. stainless steel tank

Field set-up by an Ansul agent includes, but may not be limited to, installation of proper fusible detector links and

cabling, filling provided tank with wet chemical suppressant and installing, installation of remote manual activation

station, installing a compressed gas discharge cartridge, testing, certifying and arming the system.

Parts and labor

necessary for system field set-up is the responsibility of the customer and is not included with hood purchase

Appliance Link:

If less than 3” [76.2] to edge of cooking surface

use 165

F link

supplied & installed by ANSUL

If more than or equal to 3” [76.2] to edge of

cooking surface use 135

F link

supplied & installed by ANSUL

Plenum Link 165

supplied & installed by ANSUL

Damper Link 285

factory-installed

LT-20 R Cartridge

supplied & installed by Ansul

Appliance cooking surface

INCHES [mm]

2.05

Fire Suppression System

2.05.1 Detector Links & Gas Cartridge Location

Содержание FSH-2



































































Результаты поиска

Содержание FSH-2

Отзывы:

GILES FSH-2, Руководство по эксплуатации и обслуживанию, Страница: 24 / 66

Результаты поиска

Содержание FSH-2

Отзывы: