GILES FSH-2 Скачать руководство пользователя страница 50

Страница: 50 / 66

The

HEPA Filter

is a consumable item which must be replaced periodically (see

Sections 4.02.5, Removal & 4.02.5,

Installation

It CANNOT be cleaned and reused.

Typical replacement cycle can vary significantly depending on the

cooking activities (quantity and types of food cooked each operating day). A

HEPA

filter should probably have a useful

service life of approximately

3 to 4 months

, depending on usage.

If a

HEPA

filter has been in service for a period of time and a clogged filter alarm condition occurs

(see Section 4.03.2)

first replace the charcoal filter. If the alarm clears, that is an indication that the

HEPA

filter if still serviceable. Should the

alarm

NOT

clear with the new charcoal filter, the filter probably needs to be replace.

DO NOT attempt to clean and

reuse the HEPA filter.

Use

GILES

replacement

Item No. 41254

. Write the replacement date on new filter.

IMPORTANT: Failure to use Giles OEM parts and OEM replacement filters may void the factory warranty.

5.01.4

HEPA Filter Maintenance [FSH-2A-99; HEPA MODEL ONLY]

The

FSH-2A-99 Hood

is available equipped with a replaceable

HEPA Filter

as an alternative to the electronic air cleaning

(E.A.C.) system with sustainable collector cell.

5.02

General Hood Cleaning

DO NOT

wash down Hood with water from a spray hose.

DO NOT

steam clean or use any type pressure washing equipment.

DO NOT

use products containing chlorine or other caustic chemicals.

DO NOT

use abrasive products, steel wool or scouring pads.

The factory-recommended product to use for general cleaning/degreasing of this equipment is

Simple Green® Crystal

Foaming Spray Cleaner/Degreaser

, a readily available, biodegradable, non-toxic effective degreasing cleaner

Following sections describe procedures for general Hood cleaning.

Cleaning & Maintenance

Model: FSH-2, FSH-2A-99

Charcoal Filter is a single-use, disposable filter. NEVER attempt to clean and reuse; doing so

can cause damage to the unit.

Charcoal filter is a consumable item which must be replaced periodically (see

Sections 4.02.6, Removal & 4.02.7,

Installation

). It

CANNOT

be cleaned and reused. Typical replacement cycle is every

30 to 40 days

, depending on usage.

Use

GILES

replacement

Item No. 30248

. Write the replacement date on new filter.

IMPORTANT: Failure to use Giles OEM parts and OEM replacement filters may void the factory warranty.

5.01.3

Charcoal Filter Maintenance

Continued on Next Page

Содержание FSH-2



































































Результаты поиска

Содержание FSH-2

Отзывы:

GILES FSH-2, Руководство по эксплуатации и обслуживанию, Страница: 50 / 66

Результаты поиска

Содержание FSH-2

Отзывы: