GILES FSH-2 Скачать руководство пользователя страница 47

Страница: 47 / 66

Cleaning & Maintenance

Model: FSH-2, FSH-2A-99

5.01

Filter Cleaning & Maintenance

The following sections describe the necessary procedures for cleaning and maintaining the Hood filters. Conscientious

adherence to these procedures is essential for maintaining optimum and satisfactory performance.

5.01.1

Baffle Filter Cleaning

5.01.2

E.A.C. Filter Cell Cleaning

Cleaning & Maintenance

This section explains the various cleaning and maintenance procedures needed to keep the Hood operating safely and at

peak performance.

••

DO NOT

steam clean Hood or spray with water.

••

DO NOT

use products containing chlorine or caustic chemicals.

••

DO NOT

use abrasive products, steel wool or scouring pads.

Before performing any cleaning activities, disconnect Hood and Appliance power at the main breaker.

Continued on Next Page

Generally, the grease baffle filter should be cleaned daily. Remove and clean in sink with a mild, bio-degradable,

degreasing cleaner

(Giles recommends Simple Green® Crystal Foaming Spray Cleaner)

. Rinse and dry thoroughly.

Reinstall dry filter in the unit. Baffle filter may be washed in a dishwasher.

Ensure that Filters are completely dry before reinstalling in Hood. NEVER PLACE WET FILTER INTO THE HOOD!

Stainless steel baffle filter is fabricated from thin guage metal that has potential to present sharp

edges. Exercise due care when handling and cleaning the filter to avoid injury.

It is

recommended that heavy-duty rubber gloves be worn

The E.A.C. collector cell contains parts fabricated from thin gauge sheet metal that can potentially

have sharp edges, which may cause cuts if not handled properly. To avoid injury, exercise due

care when handling and/or cleaning the cell.

It is recommended that heavy-duty rubber gloves

be worn as a precaution

The E.A.C. collector cell is sustainable and renewable; it should last for years if cleaned and handled properly. To

maintain peak performance, It

MUST BE CLEANED DAILY

; not doing so can lead to an interruption of hood/fryer

operation, premature failure of the electronic system, or reduced life of consumable charcoal filters. Follow the

procedures detailed below for effective cleaning.

IMPORTANT: The cell CANNOT withstand washing in commercial dishwashing equipment, and some commercial

cleaners/detergents will cause oxidation, or create a layer of contamination, on collection fins that can lead to system

malfunction and result in interruption of power to the fryer being served by the ventless hood.

Содержание FSH-2



































































Результаты поиска

Содержание FSH-2

Отзывы:

GILES FSH-2, Руководство по эксплуатации и обслуживанию, Страница: 47 / 66

Результаты поиска

Содержание FSH-2

Отзывы: