GILES EOF-20 Скачать руководство пользователя страница 17

Страница: 17 / 113

Installation

EOF 10-10/20

1. Carefully cut and remove the plastic shipping wrap and the strapping.
2. Using appropriate tools, carefully remove wooden framework and all other packing materials.
3. Remove all the auxillary items (Filter Pan, Baskets, Screens, Brushes & Tools) from the unit and set aside in a

safe place.

4. Carefully remove the Fryer bank from the shipping skid. The unit is extremely heavy, see

Section 2-03

. It is

strongly recommended to use only motorized lift truck, equipped with extended forks, to lift the unit.

Approach unit from the end and ensure that forks are under the unit’s tubular framework. Slowly lift unit only

high enough for casters to clear the skid risers. Have helpers slide the skid from underneath the unit, then

lower it to the floor. Be sure all casters are unlocked; the Fryer bank can then be easily manuvered manually.

2-02.

Unpacking

The unit will arrive on a shipping skid, enclosed by a wooden framework. It is secured to the wooden platform by

means of high-tensile strength strapping and the entire skid is wrapped in machine-applied stretch wrap. Certain

auxillary items (Filter Pan, baskets, fryer tools, etc.) will be packed on top of the unit or contained inside the vats.

• The appliance must remain in an upright (vertical) position during the unpacking process. Exercise care when

lifting or moving the unit. Appropriate lifting equipment will be required to remove the unit from the shipping

skid.

DO NOT attempt to manually lift the unit, it is extremely heavy.

• Exercise care when removing the wooden framework from around the unit.

• Failure to comply with these

CAUTION

notices may result in minor or moderate injury, equipment or property

damage, and void the factory warranty.

IMPORTANT!

If crate exhibited evidence of damage or mishandling, immediately inspect the unit and all accessory items and

notify the freight carrier of any damages. Typically it is the purchaser’s responsibility to file and negotiate freight

damage claims.

IMPORTANT!

Giles shall not be liable for damages caused to the unit by improper use of material handling equipment or

poor work practices, or for personal injuries or property damage which may be incurred during installation of

this equipment. Installation is the sole responsibility of the purchaser. Failure to follow these instructions

could void the factory warranty.

Содержание EOF-20


















































































































Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды

GILES EOF-20, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды