GILES EOF-20 Скачать руководство пользователя страница 70

Страница: 70 / 113

Fryer Operation

EOF 10-10/20

5-01.11.1 Resolving Controller Errors and Alarms

●

DRAIN OPEN (Error Code OPEN) -

If the pot Drain Valve is open (even slightly) while Fryer power is

ON,

alarm tone sounds, 7-Segment Display shows

OPEn,

and the

OLED Display

reads

“ERROR ALARM - DRAIN IS

OPEN”.

If the Basket Lift is down, it will be raised. Heating Elements are disabled as long as the condition exists.

Press the

[ALARM]

key to silence alarm tone. Completely close the Drain Valve to clear the error. When error is

cleared, alarm tone sounds again and the OLED Display reads

“CHECK OIL LEVEL, ENSURE VAT IS FULL, IF FULL

THEN PRESS [START]”.

This is a post-error alarm to alert user to confirm that cooking oil in the pot is still at the

FULL

level. Add oil if needed, then press the

[START]

key to return to

PREHEAT

mode.

●

MAX. ELEMENT TEMP (Error Code 19) -

Heating Element has exceeded the maximum temperature allowed by

the Controller. The alarm tone sounds, 7-Segment Display shows

Er19,

and the OLED Display shows

“ERROR

ALARM - MAX ELEMENT TEMPERATURE”.

Heating Element is automatically turned

OFF.

It must cool to an

acceptable temperature to clear the error. Typical cause of this error is low oil level, which has exposed the

heating element. It is possible for a false alarm to occur when preheating cold oil at the initial startup of a new

day. Vigorously stirring oil during preheat will usually prevent, or clear, a false alarm of this type.

●

MAX ELEMENT TEMP Post-error Warning (Error Code 07)

- After

Error 19

is cleared, a warning alarm occurs.

The 7-Segment Display shows

Er07,

and the OLED Display reads

“MAX ELEMENT TEMP - PRESS [START]”.

This

alarm alerts user that a maximum element temperature error occurred and is now cleared. Press

[START]

key to

enter

PREHEAT

mode. Heating Element will not turn

until

[START]

is pressed.

●

BAFFLE FILTER MISSING (Error Code 21) - Not Applicable

●

CHARCOAL FILTER MISSING (Error Code 22) - Not Applicable

●

CLOGGED FILTER (Error Code 23) - Not Applicable

●

E.A.C. DIRTY (Error Code 24) - Not Applicable

NOTE: If an error condition cannot be resolved, please contact a factory-authorized service agent, or call

800.554.4537 for Giles Technical Support.

Содержание EOF-20


















































































































Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды

GILES EOF-20, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды