GILES EOF-20 Скачать руководство пользователя страница 9

Страница: 9 / 113

viii

Safety

EOF 10-10/20

Specific Safety Precautions

For your safety, please observe the following precautions when operating or servicing

Model EOF Electric Fryers

Adhering to the following important safety information will help to prevent personal injury and/or damage to the

equipment.

• Before cleaning or performing maintenance, place power switch of Fryer units in the

OFF

position. Unplug

power cord or turn

OFF

power at the electrical panel supplying power to remove all power from the appliance.

•

DO NOT

wash down the Fryer interior or exterior with water from a spray hose.

• Failure to comply with

DANGER

notices will result in serious injury, even death; or damage to equipment and/or

property and may void the factory warranty.

• Prior to installation, consult a qualified electrician to ensure that installation will comply with all electrical

requirements and codes.

• The unit must be adequately and properly grounded. Improper grounding may result in electrical shock to the

user. Always refer to local electrical code to ensure proper grounding of this or any other electrical equipment.

• Check the rating label on each of the units to determine the proper power supply required. Always consult with

an electrician, or other qualified service technician, to ensure that circuit breakers and wiring are of sufficient

rating and gauge to power this equipment. A Wiring Diagram has been provided with the unit as an aid for tech-

nicians. The unit must be installed and electrically grounded in accordance with local codes, or in the absence

of local codes, in accordance with the National Electrical Code, NFPA 70.

• Improper installation, adjustment, alteration, service or maintenance could result in serious injury, even death;

equipment and/or property damage; and will potentially void the factory warranty.

•

DO NOT

use or store flammable liquids, or materials that produce flammable vapors, in the vicinity of this or

any other appliance!

•

DO NOT for any reason stand or step onto the top of the appliance, and DO NOT allow other per-

sons to do the same

. Cooking oil in the Fryer(s) can be in excess of

330

F (166°C)

and bodily con-

tact will cause extremely serious injury. Covers used to sometimes cover cooking vats/pots are not

designed to, and

WILL NOT

, support the weight of a person.

• Failure to comply with

WARNING

notices could result in serious injury, even death; damage to equipment

and/or property; and will potentially void the factory warranty.

Содержание EOF-20


















































































































Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды

GILES EOF-20, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды