GILES EOF-20 Скачать руководство пользователя страница 16

Страница: 16 / 113

Installation

EOF 10-10/20

2. Installation

Keep the appliance and surrounding area free and clear from combustible materials, 3" (7.6cm)

Please note, a wiring diagrams for each Fryer unit is attached to the rear panel. Ensure that it matches the elec-

trical specifications stated on the rating label.

Please ensure this appliance is electrically grounded in accordance with local codes, or in the absence of local

codes, with the current National Electrical Code, ANSI/NFPA 70.

Please provide adequate room for servicing and proper operation of this appliance. Also, provide

adequate ventilation in the operating area as required.

Consult with a certified electrician, or other qualified technician, prior to installing this equipment.

Ensure the electrical circuits supplying power to the units meet the specifications shown on the rating label of

each Fryer unit..

Make sure the unit is located on a level floor, in a stable position, and cannot be unintentionally moved.

Locking casters are installed along the front of the unit ... place the caster brakes in the locked position. Some

commercial codes may require that the unit be secured to an immovable structure (wall, etc.) by means of a

restraining cable to restrict movement.

Appliance is to be installed, used and maintained in accordance with the current

Standard for Ventilation

Control, and Fire Protection of Commercial Cooking Operations, NFPA 96

Compliance with the above steps will help to ensure safe and proper installation of this equipment. If there are any

questions concerning these procedures, contact a nearby Giles Manufacturer’s Representative, or call Giles Technical

Support at

800.554.4537

The following section summarizes the procedures necessary for proper installation of the unit. To avoid possible person-

al injury or equipment damage, please ensure these procedures are followed.
To ensure compliance with applicable building, health and fire codes, it is advisable that this appliance be installed

by a professional kitchen equipment contactor, or service company.

All costs for installation, including materials,

labor and fees, are the responsibility of the customer.

2-01.

Location

DO NOT MODIFY, ADD ATTACHMENTS OR OTHERWISE ALTER THIS EQUIPMENT

Содержание EOF-20


















































































































Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды

GILES EOF-20, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание EOF-20

Отзывы:

Похожие инструкции для EOF-20

Бренды по названию

Популярные бренды