Gewiss Chorus GW 10 764H, Руководство по программированию

Страница: 33 / 40

E
N
G
L
I
S
H
33
To access the Easy channel localisation mode, start from the timed thermostat normal
operation screen and press the
button key 3 times (the “Enabling supplementary parameter
pages” menu must be set on GFC). In this way you can localise the channels implemented
by the device, to insert them in the various functions created with the Easy configurator (Easy
Controller). Use the
or button key to select the channels you want to localise, then press
the button key to send the BUS command for localising the chosen channel: to confirm
the sending operation, the icon will light up temporarily. To quit the Easy channel
localisation mode, just press the button key again or wait 30 seconds from the last pressure
on the button keys.
MAS (Master)
Used to send the type (heating/cooling) and HVAC operating
mode to the area thermostats
acting as “Slaves”.
PRx (Hourly profiles)
Independent hourly profiles (from 1 to 7), each of which can
control up to 4 values of an independent variable.
Easy channel localisation mode
USER INSTRUCTIONS