Gewiss Chorus GW 10 764H, Руководство по программированию

Страница: 13 / 40

Copying the holiday program
In Auto mode, you can copy the profile of the holiday day
onto any day of the week. This function can be activated up to
6 days ahead of the chosen day. It is especially useful when a
holiday day falls during the week.
Press the
and button keys simultaneously to copy the
profile of the holiday day: on the display, the symbol and the
bar of the holiday day will flash. Use the or button key
to select the day of the week onto which you want to copy the
profile, then confirm with the
button key.
During the set day, the symbol will be lit up with a fixed light.
This function is temporary: at midnight on the selected day, the
unit returns to its programmed weekly profile. If you want to
deactivate the function (or modify the day of the week), press
the
and button keys then select the holiday day (or
the new day of the week). Press to confirm the new setting.
Pages relating to the hourly timer
Viewing the hourly profiles
NB: the hourly profiles of the timer are only active and visible
on the display when their respective channels are included in a
function with the relative actuator channel, during programming
with Easy Controller.
If the visible page relates to an hourly profile, press the
button key to activate (Auto) or deactivate (OFF) the profile. If
an hourly profile is set (via the Easy configurator) in order to
manage an Easy probe, keep the
button key pressed to
temporarily visualise the input data (type of operation, HVAC
mode, active setpoint and temperature measured) from the
device controlled by the profile.
USER INSTRUCTIONS
E
N
G
L
I
S
H
13