Gewiss Chorus GW 10 764H, Руководство по программированию

Страница: 23 / 40

E
N
G
L
I
S
H
23
USER INSTRUCTIONS
Setting the cyclical profile sending time
Used to set the frequency for sending the current hourly
profile value on the BUS. This parameter is only effective
when the timed thermostat / hourly timer is in Automatic
mode. Use the
button keys to modify the sending time
(OFF = send only with hourly profile variation; 1M, 2M, 5M,
10M, 15M, 30M, 45M, 60M = values expressed in minutes).
To confirm the set value, press the
button key within 30
seconds.
If the displayed page relates to humidity
Humidity thresholds (from 1..5)
Use the button keys to modify the value of the relative
humidity thresholds (up to 5, if enabled). The gap that can
be set varies from 1% to 100%. To confirm the set value
and move on to the next parameter, press the
button key
within 30 seconds.
If the local modification function has been enabled from the
“Enabling the supplementary parameter pages” menu for
the General + Operating Parameters group (option GF),
press the
button key to return to the start of the
parameter configuration menu. Otherwise, continue with
the configuration of the next group of parameters.
Control parameters
Control logic (2-way or 4-way)
Use the or button key to modify the type of control
logic for the temperature adjustment system (2 = common
logic; 4 = separate logic). The common control logic is
associated with 2-way systems, with one single valve for
heating and cooling.
The separate control logic is associated with 4-way
systems, with two valves - one for heating and one for
cooling. To confirm your choice and move on to the next
parameter, press the
button key within 30 seconds.