Gewiss Chorus GW 10 764H, Руководство по программированию

Страница: 14 / 40

Parameter setting
Pages relating to the humidity section
View the humidity parameters
NB: the pages relating to humidity are only active and visible
on the display when the relative channel is included in a function
with the channel of a humidity sensor (e.g. GW1x762H), during
programming with Easy Controller.
If the page displayed relates to the humidity section, press the
or button key to view the relative humidity value Hr,
specific humidity HA and dew point temperature tr.
To return to the screen listing the pages that can be viewed,
keep the
button key pressed.
Use the or button key to scroll through the sequence. To
confirm a page, press the button key or wait for the 30-
second time-out period to elapse.
To set the operating parameters of the device, bring up the main timed thermostat page
or the general hourly timer profile or the humidity page on the screen, then press the
button key.
To quit the parameter setting procedure without saving the modifications made on the
current page, just press the
button key again or wait 30 seconds from the last pressure
on the button keys. The parameters that can be modified will depend on the page you
are viewing in normal operation status: if the visible page relates to the timed thermostat,
the Set menu concerning the timed thermostat will be shown; if the visible page is that
of a general hourly timer profile, the Set menu concerning the selected profile will be
shown; if the visible page relates to the humidity section, the Set menu concerning the
selected humidity threshold will be shown.
The parameters relating to the timed thermostat / hourly timer / humidity are collected
into three functional groups: general parameters, operating parameters, and control
parameters.
USER INSTRUCTIONS
14