German RepRap X400CE, Руководство пользователя

Страница: 132 / 245

X400CE 3D Printer Manual
Seite: 127/245
Stand: 2015/08/28 11:55
© German RepRap GmbH 127/245
Number Description
4
M3 washer
2 sleeve 5mm
2 M3 self-locking nut
Fasten one end stop to the end stop holder including the two 5mm sleeves between the holder and
the end stop.
Finish Z-axis end stop
Z-axis end stop assembly
Z-axis end stop assembly parts overview
Number Description
1
L-alu opto flag Z (10x37mm)
1 Opto end stop, pre-assembled
1 M3x10 cylinder head screw
2 M3 washer
1 M3 self-locking nut
1 M6x10 cylinder head screw
1 M6 washer
1 M6 T slot nut
Next bend the 37mm opto flag at a right angle at 14mm from the end with the hole.
Install it by adding a washer and the opto flag on the cylinder head screw, insert it into the aluminium
plate and secure it with a washer and nut from underneath.