German RepRap X400CE, Руководство пользователя

Страница: 59 / 245

X400CE 3D Printer Manual
Seite: 54/245
Stand: 2015/08/28 11:55
© German RepRap GmbH 54/245
Details Ausrichtung Druckbett-Aufnahme
Align the steel plate parallel to the aluminium profiles.
To da that, measure the distance between the lower profile and the plate at the attachment point of
the frame. Turn the three trapezoidal rods as required to level the steel plate.
Afterwards, re-tighten the three grub screws.
Next, tighten the toothed belt by moving the Z-axis motor in its holder, then secure the motor.
Details Ausrichtung Druckbett-Aufnahme
To finalize this adjustment, move the steel plate all the way down by manually pulling on the toothed
belt, then move the plate back up one third of the way. By then the Z-motor mount has aligned itself
and can be fastened to the profile.
Lifting the divider plate just beneath the aluminium plate with some tape simplifies the