German RepRap X400CE, Руководство пользователя

Страница: 79 / 245

X400CE 3D Printer Manual
Seite: 74/245
Stand: 2015/08/28 11:55
© German RepRap GmbH 74/245
Bolt the motors to their POM mounts at the bottom of the rear top frame profiles. Make sure the
connectors face to the back.
Next attach the opto end stop to the rear left motor as shown. The tin strip is then located under the
washer.
Finish stepper motoren Y-axis
Idler pulley
Component list idler pulley
Number Description
2
Cylinder head screw
2 Pulley 16 teeth M8 threaded
12 M8 Washer
2 M6 Washer
2 M6 Locking nut
Fasten the cylinder head screws to the bearings in the POM mounts at the front of the X400 as shown.
In this picture, the bearing is already in the POM mount.
Turning the printing bed holder downwards makes it easier to insert the screw from below.
If the x-axis spindle is in the way, install the idler pulley before attaching the POM mount.