German RepRap X400CE, Руководство пользователя

Страница: 212 / 245

X400CE 3D Printer Manual
Seite: 207/245
Stand: 2015/08/28 11:55
© German RepRap GmbH 207/245
Once the Repetier-Host software is running select the pre-configured profile (X400) and the correct
port and baud rate for the X400CE.
X400CE settings Repetier-Host
Only Mac OS X and Linux:
For these operating systems the printer settings have to be entered by hand:
Tab Printer:
Traval Feed Rate: 6000 [mm/min]
●
Z-Axis Feed Rate: 300 [mm/min]
●
Default Extruder Temperature: 200 °C
●
Default Heated Bed Temperature: 60 °C
●
Number of Extruder: 1
●
Check Extruder & Bed Temperature: [X]
●
Remove temperature requests from Log: [X]
●
Check every 1 seconds.
●
Park Position: X:0, Y=0, Z-Min=0 [mm]
●
Send ETA to printer display: [X]
●
Go to Park Position after Job/Kill: [ ]
●
Disable Extruder after Job/Kill: [X]
●
Disable Heated Bed after Job/Kill: [X]
●
Disable Motors after Job/Kill: [X]
●
Add to comp. Printing Time: 0 [%]
●