GeoVision GV-SNVR3203 Скачать руководство пользователя страница 139

Страница: 139 / 170

129

A user type is a set of permissions in the system. When a user type is

assigned to a user, this user has all the permissions specified for the

user type.

There are four user types in the system:

⚫

Admin: Default super administrator in the system, has full

system access. Its initial password is

123456

⚫

Default: Default user reserved in the system, cannot be

created or deleted, and only has access to live view and

two-way audio. If the default user is denied access, the

corresponding channel is locked when no user is logged in,

and appears in the window.

⚫

Operator: Has basic permissions and access to cameras.

⚫

Guest: Only has access to cameras by default.

1. Click

System > User

2. To add a user, click

Add

, and then set the username and

password, select user type, permissions and whether to enable

unlock pattern as needed. Click

to save the settings.

Содержание GV-SNVR3203











































































































































































Результаты поиска

Содержание GV-SNVR3203

Отзывы:

GeoVision GV-SNVR3203, Руководство пользователя, Страница: 139 / 170

Результаты поиска

Содержание GV-SNVR3203

Отзывы: