GeoVision GV-IP LPR Cam 5R, Руководство пользователя

Страница: 79 / 213

mode once the input device (e.g. sensor or button) is triggered. See the same D/N
itions. The higher the
nger the effect. Note this function is only available for
Close
to
on.
setting in
D/N, Special Video Settings
,
4.1.1.1 Streaming 1/2
.
 Denoise:
Reduces image noise especially under low-light cond
denoise value, the stro
GV-LPC2210 / 2211 / 2011
.

Defog:
Select
Auto
to automatically enhance the visibility of images. Select
disable the functi
 Zoom:
Click the
Zoom In
and
Zoom Out
buttons to adjust
distance of the scene.
the apparent
 Focus Change:
Click the
Focus In
and
Focus Out
buttons to
focus. To focus automatically, click the
Focus Mode
adjust the
button.
 Focus Mode:
Select
Normal Scan
,
Regional Scan
or
Full Scan
and
Start
then click the
button to automatically adjust the camera focus. The
N
focuses the cam
ormal Scan
mode
era the fastest. The
Regional Scan
mode focuses the area selected
applies the
and
1 / 2011
.
t mode. Select
Auto
to automatically focus.
and follow the
ing focus
plied to the current D/N mode.
on the live view. The
Full Scan
mode performs a detailed checkup and
best focus. Note this function is only available for
GV-IP LPR Camera 5R
GV-LPC1100
/
2210
.
 Day Night Focus:
Note this function is only available for
GV-LPC2210 / 221
Saves focus settings for day mode and nigh
To configure fixed settings for day mode and night mode, select
Manual
steps below:

Make sure the
D/N
is in
Auto
mode for the best effect. The follow
setting will be ap

Adjust the focus using the
Focus In and Focus Out bu
Focus Mode
function.

Click
Day Mode Save
ttons and/or the
or the
Night Mode Save button d
the current D/N mode.
 Metering:
Controls th
epending on
e camera’s exposure. Select
Normal
for the camera to adjust
exposure based on the full live view. Select
Regional Metering
for the camera to
block marked
ears. You can establish up to 4 zones. To remove
. Note this function is only available for
GV-LPC2210 / 2211 / 2011
.
[Internal Temperature]
Shows the current internal temperature of the camera and the normal
temperature range.
[Download]
Allows you to install programs from the hard drive.
adjust exposure of specified zones. Draw directly on the live view and a
with “AE (automatic exposure)” app
the block, right-click the block and select
Delete
68