GeoVision GV-IP LPR Cam 5R, Руководство пользователя

Страница: 147 / 213

Note:
You need to prepare a Mini USB-to-USB cable and install in the camera. See
1.3.8
Installing a Mini USB Cable
.
 PIN number:
Type the PIN number that is provided by your network operator.
 Access Point Name (APN):
Type Access Point Name that is provided by your network
operator.
 Username:
Type a valid username to enable the UMTS service from your network
operator.
 Password:
Type a valid password to enable the UMTS service from your network
operator.
 Maximum Transmission Unit (MTU):
Type the Maximum Transfer Unit. The default
value is 1500.

Retain UMTS Connection:
Select this option to check the UMTS connection status
and use the drop-down list to specify the desired time length for checking frequency.
The camera will rebuild the connection if disconnection is detected.

Check VPN Connection:
Select this option to check the VPN (Virtual Private Network)
connection status. To check the IP address, type the target IP address in the
Check
Target IP Address
field.
 UMTS Authentication Protocol:
Use the drop-down list to select the UMTS
Authentication Protocol provided by your network operator.
 Enable Schedule Mode:
Starts the UMTS connection automatically based on the
schedule you set in the Select Schedule Time section. See
4.5.2 Recognizing Schedule
Settings
for the same settings.

3G Connection Status:
Indicates the connection status of UMTS or VPN.
136