Genie GCL-MT, Руководство пользователя

Страница: 46 / 60

Sec-5.2
Section 5: Troubleshooting
Display Operation in RUN Mode
This operator will display its status on the integrated display. Each time the operator runs, stops, reverses or
refuses to run, the display will indicate the operating action, what device initiated the action, and any error
condition that prevented/impacted the intended operation.
Once an error code has been generated, the operator will continue to display the error code while the
operator is not running. This error code can be cleared by pressing the stop button or stop key on the
keypad. The error code will automatically clear when the operator stops at the down limit. The last ten error
codes will continue to be stored in the operator’s error code memory after they have been cleared from the
display in the run mode.
The operator will display any uncleared trouble codes, in turn, on the integrated display, alternating with the
active condition (error or run) code, until all of the trouble codes have been cleared. Trouble codes can only
be cleared after the condition causing the code has been resolved. Trouble codes are not cleared by pressing
the stop button or stop key on the keypad. Trouble codes are stored in the operator’s memory.
OPEN
CLOSE
STOP
CAL
RUN
SCROLL
SCROLL
SET
CLEAR
RUN CODE 1>xx
Clear code in run
mode
OPEN
CLOSE
STOP
CAL
RUN
SCROLL
SCROLL
SET
CLEAR
RUN CODE 1>xx
IN CALIBRATION MODE:
Displays last ten RUN CODES
stored in memory. See RUN
CODES for more details.
Press SCROLL down key to
advance to next menu item.
Advance to next
menu item
Cycle
To aid in troubleshooting problems, this operator includes a run code memory that stores the most recent
ten events. These codes are stored with or without power. Each time the operator runs or stops, it generates
a code that it stores in this memory, used together with the error code memory, it becomes a powerful
troubleshooting aid.
The run code memory stores the last ten codes in sequence. Once ten codes are stored, the oldest code is
erased to make room for the newest code. These codes are displayed in calibration mode. The display will
flash the number of the run code and the 2-digit code followed by a description of the run code.
Run Codes
OPEN
CLOSE
STOP
CAL
RUN
SCROLL
SCROLL
SET
CLEAR
CALIBRATION
Advance
OPEN
CLOSE
STOP
CAL
RUN
SCROLL
SCROLL
SET
CLEAR
ERROR CODE 1>xx
Cycle
XX>ERROR DECRIP.
-Scrolling Text-
MODE
-Scrolling Text-
IN CALIBRATION MODE:
Displays last ten ERROR Codes
stored in memory. See ERROR
CODES for more details.
Press SCROLL down key to
advance to next menu item.