Genie GCL-MT, Руководство пользователя

Страница: 13 / 60

Sec-2.6
Section 2: Operator Installation
1. Measure the width of the door to determine the center. Make a vertical line above the door, as shown in
FIG. 6.
• If the vertical line is not in line with a door stile, a means of attaching the door bracket to the door
must be provided. This can be accomplished by spanning the center of the door’s top section
(between the top and bottom rail) with a suitable material such as wood or steel.
2. Prepare for attaching drawbar to header. If woodwork, or other suitable material is not already in place,
securely affix a 2” x 6” block of wood or metal plate as shown in FIG. 6.
3. Center the block/plate on the header.
4. Mark the door’s vertical center line on this block/plate.
VERTICAL LINE
(SEE STEP 1)
HEADER
ATTACHMENT MATERIAL
(SEE STEP 2)
HORIZONTAL LINE
(SEE STEP 6)
CENTERLINE
OF DOOR
FIG. 6