Genie GCL-MT, Руководство пользователя

Страница: 7 / 60

Sec-1.5
Section 1: Critical Installation Information
IMPORTANT INSTALLATION INFORMATION
ENTRAPMENT PROTECTION:
The installation of a monitored fail safe external reversing device is required on all momentary contact
electronically operated commercial doors. If such a reversing device is not installed, the operator will
revert to a constant contact control switch for close operation.
The Reversing Devices currently UL Approved are:
• MillerEdge® ME and MT series monitored edge sensors used in combination with Timer-Close
Module (TCM) P/N OPABTCGX.S or Sensing Module (ESM) P/N OPABESX.S
• MillerEdge® ME and MT series monitored edge sensors used in combination with MillerEdge
Interface Module P/N OPAKMEIGX.S. (Direct connect through STB inputs.)
• MillerEdge® Wireless (MEL) monitored edge sensor P/N OPAKGMMWE2.S. (Direct connect
through STB inputs.)
• ASO Sentir GF Series Monitored Sensing Edges used in combination with Timer Close Module
(TCM) P/N OPABTCGX.S or Edge Sensing Module (ESM) P/N OPABESX.S
• Residential Safe-T-Beam® Monitored Photocells - P/N 37220R (GST B-BX) and commercial P/N
38176R.S (includes extension brackets).
• Series II Commercial Safe-T-Beam® Monitored Photocells - P/N OPAKPE2.S and OPAKPEN4GX.S
(NEMA 4X).
• Monitored Retro-Reflective Photocells - P/N OPGAKRPEN4X.S (NEMA 4X).
• Monitored MillerEdge Light Curtain -P/N OPAKMLC3.S & OPAKMLC6.S
Monitored Sensing Edges are available in any door width.
NOTE:
DO NOT use take up reels in conjunction with the Monitored Sensing Edge system. Use Coil Cords
Only.