15
Setup Instructions
Setting the Date and Time
If you intend to record images, you should set the Date and Time when powering ‘ON’ the thermal
camera for the first time.
1
Make sure that the thermal camera is in Null mode (see p.14).
2
Press the MENU/ENTER button
to call up the Main Menu. Then
press the UP or DOWN key to
navigate to the System Setup
line. Press the MENU/ENTER
button to open the System
Setup menu.
3
Press the UP or DOWN arrow to select
the Date & Time line, then press the
MENU/ENTER button.
4
a) Use the UP and DOWN arrows to
select an item to change, and the LEFT
and RIGHT arrows to set a new value.
b) Repeat for each date and time
parameter.
c) Press the MENU/ENTER button to
save the change(s), or the ESC button
to return to the System Setup menu
without making any changes.
Содержание GTI10
Страница 79: ...14 SAT file SAT List SAT files only Optical light and IR files SAT CCD List SAT and CCD files...
Страница 116: ...51 Select Spline Range style highlight max and min temperature in the chart...
Страница 117: ...52 3D gap depth setting Graphics symbol setting...
Страница 128: ...63 1 IR image subtraction 2 Tool subtraction Draw one circle and one rectangle on each thermal image...
