Generac Power Systems G007144, Руководство по установке

Страница: 8 / 68

Safety Information
2 Installation Guidelines For 50 Hz Air-Cooled Generator Sets
Safety and Informational Decals
This unit is equipped with safety and informational decals displaying pictorial symbols. These symbols and decals are
described below. Locations are identified in
Figure 1-1 . Contact an IASD for a replacement if a decal is missing,
damaged, or illegible.
ID Decal Description Meaning
A Oil Drain Oil drain location
B Positive Battery Cable
•
Electricity is present. Keep positive terminal covered
at all times when connected to battery.
•
Read and understand manuals completely before
using this equipment.
•
Identifies positive battery cable.
C Negative Battery Cable Identifies negative battery cable
D Fuel Selection Step 1: Unit set for Natural Gas (NG) operation.
Step 2: Press and rotate fuel selector 180° to change fuel
type.
Step 3: Unit set for Liquid Propane (LPG) operation.
NOTE: This decal is intended to be discarded after
installation and need not be replaced if missing.
E Shock Hazard / Read
The Manual
•
Live components carrying potentially lethal voltages
may be accessible inside. Render the equipment
safe before attempting further access.
•
Read and understand manuals completely before
attempting further access.
F Burn Hazard /
Asphyxiation Hazard
•
Surface may be hot. Do not touch when operating
equipment. After equipment shutdown, allow
sufficient time for surfaces to cool prior to contact.
•
Carbon monoxide, a colorless odorless poisonous
gas, is emitted in engine exhaust while equipment is
running. Avoid inhalation of exhaust gases.
NG LP
NG
LPG
1
2
3