Generac Power Systems G007144, Руководство по установке

Страница: 11 / 68

Safety Information
Installation Guidelines For 50 Hz Air-Cooled Generator Sets 5
General Safety
ISO000110
Hot surface. Keep equipment away from
combustible materials during operation. Do not
touch hot surfaces when operating equipment.
After equipment shutdown, allow sufficient time
for surfaces to cool prior to contact.
ISO000533
The enclosure provides protection against
hot surfaces inside the generator set. Hot
surfaces may be present if the generator set
has been operating under a large load. Do
not open the generator set enclosure while
the generator set is running.
ISO000100a
Read instruction manual.
Read and understand manual
completely before using this equipment.
ISO000257
Refer to local codes and standards for
safety equipment required when working
with a live electrical system.
ISO000182a
Only qualified service personnel may
install, operate, and maintain this
equipment.
ISO000539
Verify the generator set is installed in
accordance with the manufacturer’s
instructions and recommendations.
Following proper installation, do nothing
that might alter a safe installation and
render the unit in noncompliance with
locally applicable codes, standards,
laws, and regulations.
ISO000540
ISO000531a
Follow all safety precautions in all
documents included with this equipment.
ISO000538
Comply with regulations the local
agency for workplace health and
safety has established.
ISO000145
In the event of an electrical accident, immediately
shut power OFF. Use non-conductive implements
to free victim from live conductor. Apply first aid
and get medical help.
ISO000252
Use only fully-charged fire extinguishers
rated according to applicable industry
standards.
ISO000529
No open flames near equipment.
Flammable and explosive gases are
present inside this equipment.
ISO000217
Do not obstruct cooling and ventilating
airflow around the generator set.
ISO000216
Do not stand on top of generator set or
use generator set as a step.
ISO000528
No smoking near equipment.
Flammable and explosive gases are
present inside this equipment.
ISO000543
User access prohibited. Do not open the
enclosure. No user serviceable parts
inside. Only qualified service personnel
may install, operate, and maintain this
equipment. Contact an IASD.