Generac Power Systems G007144, Руководство по установке

Страница: 17 / 68

Unpacking and Inspection
Installation Guidelines For 50 Hz Air-Cooled Generator Sets 11
Section 2: Unpacking and Inspection
General
NOTE: Carefully inspect contents for damage after
unpacking. It is advised to unpack and inspect unit imme-
diately upon delivery to detect any damage which may
have occurred in transit. Any claims for shipping damage
need to be filed as soon as possible with the freight car-
rier. This is especially important if generator set will not
be installed for a period of time.
•
This standby generator set is ready for installation
with a factory supplied and pre-mounted base pad
and has a weather protective enclosure intended
for outdoor installation only.
•
If any loss or damage is noted at time of delivery,
have delivery person(s) note all damage on the
freight bill or affix their signature under consignor’s
memo of loss or damage.
•
If a loss or damage is noted after delivery, separate
damaged materials and contact carrier for claim
procedures.
•
“Concealed damage” is understood to mean dam-
age to contents of a package not evident at time of
delivery, but discovered later.
Required Tools
•
General SAE and metric hand tools
– Wrenches
– Sockets
– Screwdrivers
•
Standard electrician’s hand tools
– Drill and bits for mounting and routing conduits
•
4 mm hex key wrench (for access to customer con-
nections)
•
3/16 in hex key wrench (test port on fuel regulator,
and E1/E2/G electrical wiring connections)
•
Manometer and adapter to 1/8 in NPT (for fuel
pressure checks)
•
Meter capable of measuring AC/DC voltage and
frequency
•
Torque wrenches
NOTE: Use tools with insulated handles when working
with or near electrical connections.
Unpacking
Proceed as follows to unpack unit:
1. Remove outer shipping carton.
2. See Figure 2-1 . Remove wood frame.
Figure 2-1. Crated Generator Set
3. See Figure 2-2 . Lid will be locked. A set of keys is
attached to the cardboard sheet on top of genera-
tor set. An additional set is attached to the pallet
bracket on the front intake end of generator set.
Remove keys from cardboard and pallet bracket.
Figure 2-2. Keys As Shipped
NOTE: The enclosed keys provided with this unit are
intended for service personnel use only.
000427
006729