Generac Power Systems G007144, Руководство по установке

Страница: 15 / 68

Safety Information
Installation Guidelines For 50 Hz Air-Cooled Generator Sets 9
Hot Surfaces
The generator set enclosure provides protection against
hot surfaces inside the enclosure. Surfaces which may
be hot while the generator set is operating are identified
in
Figure 1-2 .
Follow the generator set shutdown procedure in Shut-
ting Generator Set Down While Under Load Or
During A Mains Power Outage
before opening the
enclosure. This allows adequate cooling to reduce the
risk of exposure to hot surfaces.
Figure 1-2. Hot Surfaces
ISO000533
The enclosure provides protection against
hot surfaces inside the generator set. Hot
surfaces may be present if the generator set
has been operating under a large load. Do
not open the generator set enclosure while
the generator set is running.
006597