Watchdog 100 Instruction Manual
50
© 2017 Geist
GM1118 Watchdog 100 Instruction Manual
·
"From" Email Address:
The address which the unit's emails should appear to come
from. Note that many hosted email services, such as Gmail, will require this to be the
email account of a valid user.
·
Username
and
Password:
The login credentials for the email server. If your server
does not require authentication (open relay), these can be left blank.
Microsoft Exchange servers will have to be set to allow SMTP relay from the IP address of
the unit. In addition, the Exchange server will need to be set to allow "Basic
Authentication", so that the unit will be able to log in with the AUTH LOGIN method of
sending its login credentials. Other methods, such as AUTH PLAIN, AUTH MD5, etc. are
not supported.
Figure 3-28 Email Target Configuration Page
To Add or Modify a Target Email address:
1. Click on the
Add
or
Modify
icon.
2. Type email address and then click
Save
.
To Delete a Target Email address:
1. Click on the
Delete
icon next to the address you wish to delete.
2. Click the
Delete
button on the pop-up window to confirm.
To send a test email:
1. Click on the
Test Email
icon next to the address you wish to test.
2. A pop-up window will indicate that the test email is being sent. Click
OK
to dismiss
the pop-up.
