GEDA 300 Z Скачать руководство пользователя страница 97

Страница: 97 / 104

300 Z/ZP 2

Malfunctions – diagnosis – repair

BL144 GB 2019-11

5.4

Retrieving the platform

Rescue may become necessary in the event that, e.g.

•

there is no mains voltage.

•

the electrical system malfunctions.

•

the drive has failed.

•

the safety gear has triggered.

If the supervisor/platform operator does not feel confident or

qualified to organise and carry out the rescue, notify the relevant

authorities (rescue personnel).

5.4.1

Basic conduct in the event of a rescue/malfunction

•

Obtain an overview of the situation.

•

Remain calm and do not act hastily.

•

Be cautious and thorough when checking the situation!

Is anybody hurt?

•

Keep unauthorised persons away.

•

Contact any persons trapped in the car.

•

Attempt to find the cause of the malfunction/defect on the system,

e.g.

power failure

safety gear triggered

•

If necessary, inform the trapped persons about the planned

procedure.

•

Notify your supervisor about the malfunction.

•

Notify any rescue services.

The sequence of measures can/must be amended by the

attendant/rescue personnel depending on the specific situation.

Содержание 300 Z









































































































Результаты поиска

Содержание 300 Z

Отзывы:

Похожие инструкции для 300 Z

Бренды по названию

Популярные бренды

GEDA 300 Z, Руководство по эксплуатации

Результаты поиска

Содержание 300 Z

Отзывы:

Похожие инструкции для 300 Z

Бренды по названию

Популярные бренды