GEDA
®
1500 Z/ZP
Technical description
BL076 GB Edition 07.2015
21 / 84
Operating Manual
3.1.1
Use as a material hoist
Switching to material hoist is carried out at the key switch of the
platform control (key removed). The folding plate (cover above the
platform control) must be folded down and secured with a lock, so that
only control from outside is possible.
Operation is carried out using the ground control (manual control)
outside the danger zone, or – above the lower safety area (about 2 m
above the ground) – from the electric modules of the landing level
control.
−
Automatic operation is possible above the safety height (refer to
Chapter
3.1.2
Use as a transport platform / climbing platform
The platform is intended for provisional use on constructions sites for
transporting persons and materials. It must only be used by trained
personnel (platform operator) who receive the key to activate the
platform control.
When the sliding plate (cover over the platform control) is pushed
upwards and the key switch on the platform control is switched on by
the platform operator, the machine is used as a transport platform or
mast climbing platform.
•
The maximum number of persons on the platform is
limited to 7 (incl. platform operator).
•
Operation is only possible from the platform control in dead man's
control, thus, other control locations are disabled.
−
During descending, the platform stops approx. 2 m above the
ground. After the platform operator has made sure that the travel
path is clear, he/she presses and holds the
Down
button, then a
signal is emitted. After approx. 3 seconds, the platform moves and
stops at the
DOWN
limit switch.
•
It is possible to stop at any position (e.g. to carry out tasks from the
platform or unload bulky components over the enclosure).
