GEA T.VIS M-20 FDD, Инструкция по эксплуатации

Страница: 3 / 58

TABLE OF CONTENTS
1 General Information 5
1.1 Information on the Document 5
1.1.1 Binding Character of These Operating Instructions 5
1.1.2 Notes on the Illustrations 5
1.1.3 Symbols and Highlighting 5
1.2 Manufacturer address 6
1.3 Contact 6
1.4 EU Declaration of Conformity 7
1.5 Translated copy of the EU Declaration of Conformity 8
2 Safety 9
2.1 Intended use 9
2.1.1 Requirements for operation 9
2.1.2 Improper operating conditions 9
2.2 Operator’s Duty of Care 10
2.3 Subsequent changes 10
2.4 IP Protection classes 11
2.5 General safety instructions and dangers 11
2.5.1 Principles for safe operation 12
2.5.2 Environmental Protection 12
2.5.3 Electrical Equipment 12
2.6 Supplementary Regulations 13
2.7 Qualification of personnel 13
2.8 Safety equipment 14
2.8.1 Signs 14
2.9 Residual dangers 15
2.9.1 Electrostatically Endangered Components and Modules 15
2.10 Danger zones 16
3 Description 17
3.1 Design 17
3.2 Functional description 19
3.2.1 Operation Principle 19
3.2.2 Control top without solenoid valves 19
3.2.3 Control Top with Solenoid Valves 19
3.2.4 Control Top with Cap 20
3.2.5 Safety Air Exhaust/Installation Position 20
3.2.6 Reset function 21
4 Transport and storage 22
4.1 Storage conditions 22
4.2 Transport 22
4.2.1 Scope of supply 22
5 Technical data 23
5.1 Type plate 23
5.2 Technical data 24
5.3 Specification sensor module 24V DC Version 25
5.4 Switching point tolerances and signal output 26
5.4.1 Signal output 26
5.4.2 Signal output inverted 26
5.5 Lubricants 26
5.6 Equipment 27
6 Assembly and installation 28
6.1 Safety instructions 28
6.2 Establishing hose connections 28
6.3 Pneumatic connections 28
6.3.1 Control Top with 1 Solenoid Valve or Without Solenoid Valve 29
6.4 Electrical connections 29
6.4.1 Electrical 24V DC Wiring 30
6.5 Visual Display 31
6.5.1 Illuminated dome 31
6.5.2 Colour Changeover 32
6.6 Control Top Fitted to VARIVENT Valve FDD 32
430BAL014475EN_2
03.09.2021 3