GEA RedGenium, Инструкция по эксплуатации, Страница: 13 / 118

TABLE OF FIGURES
Fig. 1 CE mark 18
Fig. 2 Mounting location of the product identification (nameplate) 30
Fig. 3 Standard GEA RedGenium heat pump 32
Fig. 4 Position of the reciprocating compressor 33
Fig. 5 Arrangement of the compressor drive motor 34
Fig. 6 Arrangement of the coupling 35
Fig. 7 Arrangement of the evaporator 35
Fig. 8 Position of the condenser 36
Fig. 9 Arrangement of the oil cooler 37
Fig. 10 Position of the desuperheater 37
Fig. 11 Position of the subcooler 39
Fig. 12 Position of the control cabinet 40
Fig. 13 Safety labels of the pressure and temperature sensors,
heater 43
Fig. 14 Marking the safety valves 43
Fig. 15 Labelling of the screwed connections 44
Fig. 16 Labelling of the pipes 45
Fig. 17 Marking of direction of rotation of the compressor drive motor
45
Fig. 18 Label, Pressurised product 46
Fig. 19 Label for transport 46
Fig. 20 Label of the change-over valve 46
Fig. 21 Test verification for the control system 47
Fig. 22 Designation of the earthing connection 47
Fig. 23 Labelling of the parts delivered separately 49
Fig. 24 Process flow chart 51
Fig. 25 Designation of the lifting points 57
Fig. 26 Secondary refrigerant system 73
Fig. 27 Vacuum required to remove moisture from refrigerating
plants 77
Fig. 28 Stop valve open 78
Fig. 29 Stop valve closed 78
Fig. 30 Check valve 78
Fig. 31 Shuttable check valve 78
Fig. 32 Control valve 79
Fig. 33 Shuttable check valve 79
Fig. 34 Solenoid valve 79
Fig. 35 Change-over valve 79
Fig. 36 Oil pressure regulating valve 79
Fig. 37 Overflow valve, safety valve 80
Fig. 38 Pressure controlled check valve 80
Fig. 39 Quick acting valve, spring-loaded 80
Fig. 40 Charging valve, drain valve 80
Fig. 41 Service valve 80
Fig. 42 Thermostatic 3-way valve 80
Fig. 43 Temperature controlled control valve 81
Fig. 44 Electronic expansion valve 81
Fig. 45 Motor direction of rotation (schematic representation) 83
L_151511_2
19.12.2019 13