GEA Futuro Скачать руководство пользователя страница 20

Страница: 20 / 108

Description

Correct applications

2007-9015-001
03-2014

20 / 108

Description

3.1

Correct applications

The product described was designed for use in agricultural livestock farm
operations.

The product is exclusively designed to:

● Evacuate dairy manure from a free stall barn to a manure reservoir pit or

lagoon of a maximum consistency of 1½” [38mm]. Refer to the Appendix
section on consistency test.

● Transfer manure that may contain only very limited quantities of

bedding,(sand, sawdust, wood shavings, chopped straw/hay).

● Be operated in an environment free of frozen manure.

Any applications that are not listed here are not part of the intended purpose and
are therefore considered as improper use!

The following in particular are prohibited:

● Processing others substances than manure and water into the pump.

● Processing manure containing excessive amounts of chopped bedding,

sawdust, wood shavings, wood pieces or other debris.

● Allowing the temperature in the room where the pump is installed to drop

below freezing.

● Installing an electrical motor on the equipment which does not match the

motor technical specifications provided in this manual. The equipment is not
designed to use any other type of motor than those listed. Improper motor
performance may result in damage to the equipment and/or motor.

The manufacturer/supplier is not liable for any resulting damage. The user
alone bears the risk.

Correct use also includes reading the instructions and following the inspection
and maintenance instructions.

● Original GEA Houle parts and accessories are specially designed for GEA

Houle equipment.

● The manufacturer expressly points out that only original parts and original

accessories have been adapted, tested and authorized for use with the
product.

● We would specifically like to point out that parts or accessories not supplied

by ourselves and setting instructions not provided by GEA Houle are not
checked or released by us either.

● The installation or use of products from other manufacturers may affect the

specified properties of the original parts and lead to injury to people and
animals.

● The manufacturer does not accept any liability for injury to people or

animals, or damage to the product, caused by the use of products from other
manufacturers.

Содержание Futuro













































































































Результаты поиска

Содержание Futuro

Отзывы:

Похожие инструкции для Futuro

Бренды по названию

Популярные бренды

GEA Futuro, Инструкция по эксплуатации и руководство по установке

Результаты поиска

Содержание Futuro

Отзывы:

Похожие инструкции для Futuro

Бренды по названию

Популярные бренды