![GE Vivid 3 Pro Скачать руководство пользователя страница 69](http://html1.mh-extra.com/html/ge/vivid-3-pro/vivid-3-pro_service-manual_4262532069.webp)
GE M
EDICAL
S
YSTEMS
D
IRECTION
2300164-100, R
EVISION
7
V
IVID
™ 3 P
RO
/V
IVID
™ 3 S
ERVICE
M
ANUAL
3-6
Section 3-3 - Receiving and Unpacking the Equipment
CAUTION:
When using sharp tools to open packing materials, take care to avoid cutting or damaging
the contents.
Note:
Unless otherwise specified, referenced items are shown in
Figure 3-1
on page 3-4.
1) Cut and remove the three securing steel strips (item 16).
2) Release the eight Clip-lok
TM
clips (item 15) securing the front wall (item 13) and remove the front
wall. (Refer to the procedure described in
Section 3-3-1-1
on page 3-4).
3) Release the eight Clip-lok
TM
clips securing the back wall (item 14) and remove the back wall.
4) Remove the small cartons containing the probes and peripheral options (items D and E in
Figure 3-3
below) from the wooden crate.
5) Remove the console control support back foam (item 11 in
Figure 3-3
, above).
6) Remove the keyboard support foam located in front of the keyboard (item 10 in
Figure 3-3
, above).
7) Remove the back support foam located in front of the rear wheels (item 9 in
Figure 3-3
, above).
8) Remove the top cover by opening the six clips fastening it to the
right
and
left
walls. For details on
opening the clips, refer to
Section 3-3-1-1
on page 3-4.
9) Remove the
right
wall (item 6) and the
left
wall (item 7) by opening the three clips fastening each to
the base.
10) Cut and remove the antistatic sheet (item 2 in
Figure 3-4
below) that is wrapped around the unit,
taking care not to damage the antistatic cover.
11) Remove the antistatic cover (item 4 in
Figure 3-4
).
Figure 3-3 Probes and Peripherals in Original Packaging
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com