GE PanaFlow MV80, Руководство пользователя

Страница: 51 / 164

PanaFlow™ MV80 & MV82 User’s Manual 39
Chapter 2. Installation
2.6.2 4-20 mA Output Connections
The standard PanaFlow meter has a single 4-20 mA loop. Two additional loops are available on the optional
communication board. The 4-20 mA loop current is controlled by the meter electronics. The electronics must be wired
in series with the sensor resistor or current meter (see
Figure 31 , Figure 32 or Figure 33 below). The current control
electronics requires
12 volts at the input terminals to operate correctly.
Figure 31: Isolated 4-20 mA Output with External Power Supply
Figure 32: Non-Isolated 4-20 mA Output Using Meter Input Power Supply
Figure 33: Isolated 4-20 mA Output Using Meter Provided Power Supply
4-20 mA +
4-20 mA –
4-20 mA voltage = +V
mA
+V
Meter
R > 250
–
L
–V
For Hart Communications
signal loop must have a
minimum of 250 ohms load
resistance R .
L
For AC and DC
powered meters
+ Pwr
– Pwr
DC Power 4-20 mA +
4-20 mA – DC Common
only
mA Meter
For HART
communications,
the signal loop must
have a minimum of
250 ohms load
resistance.
R > 250 Ohm
L
DC powered meters
+ 24 VDC
– 24 VDC
4-20 mA +
4-20 mA –
Meter Provided
mA Meter
For HART
communications,
the signal loop must
have a minimum of
250 ohms load
resistance.
R > 250 Ohm
L
AC units only.
DC Power